| Author | Thread |
|
|
03/16/2012 01:48:18 PM · #1 |
i have a 60D and my yong-nuo flash wont fire either directly connected to the hotshoe or with a radio trigger if the camera in is live view mode. the on-board flash will fire however.
as soon as i take it out of live view the flash works as expected.
is this by design or is something wrong?
|
|
|
|
03/16/2012 01:59:15 PM · #2 |
| sounds like a bug in the embedded software. Maybe report it to Canon and see if a fix can be acquired |
|
|
|
03/16/2012 02:30:42 PM · #3 |
| My 50D is the same way. I guess I always just assumed it was by design. |
|
|
|
03/16/2012 02:34:25 PM · #4 |
| The 7D will fire a 580 on camera in live view (was curious so just tried).... dead battery in my radio trigger so cannot test the off came flavour right now. Sounds like the 3rd party did not get all the reverse stuff correct :-( |
|
|
|
03/16/2012 03:50:26 PM · #5 |
| ok, so im not the only one. |
|
|
|
03/16/2012 04:51:57 PM · #6 |
Hm. I had never tried, so I was curious...
Works on my D300 mounted and with remotes, though it's super clunky since the D300 had some of the earliest live view, so it goes to live view, you actuate the shutter, the mirror closes, then goes up then the shutter fires.
Found a link for you though.
ETA here's another one. Is that you or somebody with your same name on the second one?
Message edited by author 2012-03-16 16:54:26. |
|
|
|
03/16/2012 07:39:41 PM · #7 |
| Yep that was me. I never saw that reply. Thanks! |
|
|
|
03/16/2012 09:53:59 PM · #8 |
Just fired my 430 ex ii on hotshoe and optical trigger from 60d in live view. Also unable to trigger my yn560 on hotshoe in live view.
Message edited by author 2012-03-16 22:05:25. |
|
|
|
03/17/2012 06:59:37 AM · #9 |
Originally posted by nstevens85:
Just fired my 430 ex ii on hotshoe and optical trigger from 60d in live view. Also unable to trigger my yn560 on hotshoe in live view. |
ok that confims the link to POTN forums, its a non-canon flash problem. thanks! |
|
|
|
03/17/2012 01:58:29 PM · #10 |
Well, if I'm reading things right... you might be able to try one of the other silent shooting modes to make it work. Apparently you can disable it, but I didn't check the actual manual. Here's where I found mention of it-
//www.imaging-resource.com/PRODS/E60D/E60DLIVEVIEW.HTM
Search for "silent" and you'll find the relevant info. |
|
|
|
03/17/2012 02:39:37 PM · #11 |
Originally posted by spiritualspatula:
Well, if I'm reading things right... you might be able to try one of the other silent shooting modes to make it work. Apparently you can disable it, but I didn't check the actual manual. Here's where I found mention of it-
//www.imaging-resource.com/PRODS/E60D/E60DLIVEVIEW.HTM
Search for "silent" and you'll find the relevant info. |
You are correct. When I set 'Silent Mode' to 'disabled' it now works on hotshoe with yn560. It was on Mode 1 by default which is why it was not working. |
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Prints! -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2024 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 04/17/2024 11:21:16 PM EDT.
