DPChallenge: A Digital Photography Contest You are not logged in. (log in or register
 

DPChallenge Forums >> Hardware and Software >> Digital dehumidify dry cabinet box
Pages:  
Showing posts 1 - 9 of 9, (reverse)
AuthorThread
02/14/2017 11:15:26 AM · #1
If you use one can you recommend?
02/14/2017 11:47:14 AM · #2
Just a little heat works. All it takes is a couple of degrees above the room temperature. A piano drier, a reptile warmer rock, small light bulb, or similar small heat producing item placed at the bottom, inside the cabinet, will keep it dry.
In any case, I would run it without the gear in it for a day or so and make sure it does not get too hot inside.
02/14/2017 11:54:35 AM · #3
Hairdryer.....
02/14/2017 11:59:49 AM · #4
Originally posted by NikonJeb:

Hairdryer.....

Way too hot.
02/14/2017 01:06:03 PM · #5
Originally posted by NikonJeb:

Hairdryer.....

Originally posted by Bear_Music:

Way too hot.

Most decent hairdryers have a few settings on them for both level of heat and fan speed.
02/14/2017 01:13:27 PM · #6
You might be able to find a food dehydrator for less than one intended for photo equipment, though as with the hair dryer I'd make sure it can be set to a low-enough temperature.

The other old standby is to put the gear in a sealed container with a large amount of uncooked white rice (or silica-gel packs).

Message edited by author 2017-02-14 13:14:46.
02/14/2017 01:16:56 PM · #7
Originally posted by NikonJeb:

Originally posted by NikonJeb:

Hairdryer.....

Originally posted by Bear_Music:

Way too hot.

Most decent hairdryers have a few settings on them for both level of heat and fan speed.


Still way too hot. The lowest setting for a hair dryer is still several hundred watts, and the required power, while dependent on the cabinet, is certainly less than about 40 watts as a maximum. In any case, anything greater will incur a pretty large operating expense. A 40W source, operated continuously, costs about $40 per year.
02/15/2017 01:09:43 AM · #8
Reptile heat pad, under $15. Available in sizes from 7 to 25 watts or so. They are designed to keep reptile enclosures 7 to 10 degrees above room temperature. Plus, no noise.
02/15/2017 07:31:53 AM · #9
Thanks for the info guys
Pages:  
Current Server Time: 04/23/2024 06:56:10 PM

Please log in or register to post to the forums.


Home - Challenges - Community - League - Photos - Cameras - Lenses - Learn - Prints! - Help - Terms of Use - Privacy - Top ^
DPChallenge, and website content and design, Copyright © 2001-2024 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 04/23/2024 06:56:10 PM EDT.