Author | Thread |
|
07/30/2007 10:34:03 AM · #1 |
Last night I was using one of my friend's 400D/XTi and I felt that the built-in flash takes some time to recharge. After taking a shot using flash I had to wait for at least 7-10 seconds before system was ready for another shot, it was keep saying "Busy ", is this a problem or something I was missing. |
|
|
07/30/2007 10:41:22 AM · #2 |
Was the battery low on charge? 10 seconds sounds like way too long. I just checked recharge on my 30D and its about 1 second with the pop-up flash.
|
|
|
07/30/2007 10:55:15 AM · #3 |
Originally posted by idnic: Was the battery low on charge? 10 seconds sounds like way too long. I just checked recharge on my 30D and its about 1 second with the pop-up flash. |
Yes that is the first thing I checked and battery was full charged. I also checked my 20D and it is pretty fast in there also. |
|
|
07/30/2007 10:55:16 AM · #4 |
Is the noise reduction on? |
|
|
07/30/2007 10:57:36 AM · #5 |
Originally posted by quiet_observation: Is the noise reduction on? |
that I am not sure abut I noticed that he has sensor cleaning turned on so I am not sure if system was doing cleaning with every shot or not, Also I will ask him about the what CF he has in the system because if it has less speed CF then system might be taking some time to write. |
|
|
07/30/2007 10:59:33 AM · #6 |
My XTI only takes about a second between shots with the built in flash....most of the time. Every once in a while it will take 5-7 seconds to come back. |
|
|
07/30/2007 01:06:20 PM · #7 |
Originally posted by xstream: My XTI only takes about a second between shots with the built in flash....most of the time. Every once in a while it will take 5-7 seconds to come back. |
Noise reduction wouldn't matter. If it was doing NR, it would be exposing the sensor. And if you were doing a "normal" (read: not a long one) exposure, there's no reason to do NR to begin with. 7-10s is a very long time for the flash to recharge, even my 350D takes about a second. Were you shooting bursts with flash? In that case, I could see that long to fully charge the flash from nothing but otherwise that's not right. Also, 7-10s to flush the buffer of one image to CF? No way, if that's the case then there's a serious issue no matter what speed card you have.
|
|
|
07/30/2007 01:52:30 PM · #8 |
I have the same problem with the built in flash. At first it takes about 1 second in between but after about 4 shots it takes a good 5-6 seconds for it to reload. It seems like forever. I now use a seperate flash if I know I am going to need the flash a lot. |
|
|
07/30/2007 01:59:34 PM · #9 |
Originally posted by JenniferDavidGA: I have the same problem with the built in flash. At first it takes about 1 second in between but after about 4 shots it takes a good 5-6 seconds for it to reload. It seems like forever. I now use a seperate flash if I know I am going to need the flash a lot. |
When you take a picture with the flash you most likely are not draining the flash 100% so you are able to take another shot immediately. However, if you take a bunch of shots in a row then the flash ends up being drained completely and you have to wait for it to recharge. |
|
|
07/30/2007 03:49:47 PM · #10 |
Originally posted by skylercall: Originally posted by JenniferDavidGA: I have the same problem with the built in flash. At first it takes about 1 second in between but after about 4 shots it takes a good 5-6 seconds for it to reload. It seems like forever. I now use a seperate flash if I know I am going to need the flash a lot. |
When you take a picture with the flash you most likely are not draining the flash 100% so you are able to take another shot immediately. However, if you take a bunch of shots in a row then the flash ends up being drained completely and you have to wait for it to recharge. |
I don't think it was draining flash 100% but something must be going wrong (at-least at my end). I think it has something to do with some sort of settings in the camera that I might not be aware of. e.g. if you have custom setup for some X thing enabled, system would do N things etc...I am just making a wild guess as I have not seen it from the setup prospectives. |
|
|
07/30/2007 07:16:40 PM · #11 |
Originally posted by pgirish007: I don't think it was draining flash 100% but something must be going wrong (at-least at my end). I think it has something to do with some sort of settings in the camera that I might not be aware of. e.g. if you have custom setup for some X thing enabled, system would do N things etc...I am just making a wild guess as I have not seen it from the setup prospectives. |
The only custom functions for flash (that I know of) are "force 1/200 in Av" and a choice of average or evaluative ETTL2. I don't think it's something you're doing wrong. Maybe try a different battery altogether? It could be saying full charge but not really having it. Also, does it shoot properly in burst mode without the flash up?
|
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 03/12/2025 09:33:19 AM EDT.