| Author | Thread |
|
|
05/29/2007 11:28:29 AM · #1 |
....purchasing a mat cutter.
What do I look for when purchasing?
C&H, Logan, Fletcher, Gunner?
Any thoughts?
Thanks.
|
|
|
|
05/29/2007 12:50:38 PM · #2 |
| A keen eye & and steady hand. |
|
|
|
05/29/2007 01:20:02 PM · #3 |
i use a system by Frameco. They have training sessions and are very helpful.
I have their Mat Master 360 System.
they are located in Paso Robles,Ca.
With offices in England and Australia.
In California call or email: Maryann / Mark Salazar
frameco
efren |
|
|
|
05/29/2007 01:27:14 PM · #4 |
I use the Logan handheld... takes a steady hand, but it's very flexible and pretty easy to use, just keep that blade sharp.
|
|
|
|
05/29/2007 02:15:28 PM · #5 |
I bought and use a $30 (US) mat cutting tool from Michaels Arts and Crafts. It works well.
You didn't mention how many and how often you will be cutting. If you are doing this as a service say, a dozen or more per day, then you'll want to shop around to see if this model will work in your environment.
The first time you try it, I recommend practicing once or twice on some scrap mat board. It took me a couple of test runs before I got the hang of it.
.
|
|
|
|
05/29/2007 02:20:37 PM · #6 |
| I use Logan. Whatever brand you get, if you are going to cut more than a few mattes, I would highly recommed one that you can fit a full size matte in (32x40) and has good smooth guide rails for the cutter so you get consistant straight lines. They do take a bit of practise so do a few cuts on scrap matte first. |
|
Home -
Challenges -
Community -
League -
Photos -
Cameras -
Lenses -
Learn -
Help -
Terms of Use -
Privacy -
Top ^
DPChallenge, and website content and design, Copyright © 2001-2025 Challenging Technologies, LLC.
All digital photo copyrights belong to the photographers and may not be used without permission.
Current Server Time: 03/12/2025 02:51:43 AM EDT.
